Fully Automatic Inflator with Conveyor System
Specifications include labor and material to produce this machine with a range of 6 to 17.5" diameter.
Contact us at tire.equip@steinertindustries.com for estimates and more information.
- (1) Hydraulic Cylinder with Steel Piston and 1.75" Diameter Rod
- (1) Pc. "D" Frame, 3" Thick with 4" Front Bar & 6" Top Bar
- Table Top - 1 ½" x 36" x 36"
- Limit Switches with Steel Rollers
- (8) Aluminum Conveyor Plates, 18" Square with Center Steel Inserts
- All Guards - 14ga. Steel
- Hydraulic Valve and Flow Control
- (2) Air Oil Tanks for Hydraulic Cylinder
- Pin Cylinder Bracket with ½" Mounting Holes
- All Air Controls and Hydraulic Piping
- Control Box - Hoffman CSD 20166
- 40 Neoprene Wheels for Conveyor Plate Travel
- Click PLC
- Chain Drive Conveyor System
- Extra Spring in Torque Limiter
- Bearing Blocks and Conveyor Shafts - 1 ¼" Diameter
- 1 HP 3 PH AC Variable Frequency Drive
- 1 HP 220/440 Conveyor Drive Motor
- Electronic Eye
- 1" Regulator and Air Valve (1" Air Line into Tire)
- Frame Tubing - 2" Steel, Square with 3/16" Wall
- Machine finish grey, guards are orange
- Parts List
- TOTAL: 73,700.00
Delivery: 12 to 16 weeks from receipt of Purchase Order. Crating: Completely crated on a skid - $1,200 Shipping: To be determined Terms: 1/3 with Purchase Order, 1/3 after 30 days, 1/3 Net 30 Days after shipping
Hoods
Please note: Only one of any size is needed for a machine. You may choose one or all sizes to suit your needs.
| Description | Qty | Each |
|---|---|---|
| 6" X 6" Deep Inflator Hood | 1 | 635.00 |
| 8" X 6" Deep Inflator Hood | 1 | 689.00 |
| 10" X 6" Deep Inflator Hood | 1 | 730.00 |
| 12" X 6" Deep Inflator Hood | 1 | 852.00 |
| 13" X 6" Deep Inflator Hood | 1 | 920.00 |
| 14" X 6" Deep Inflator Hood | 1 | 992.00 |
| 15" X 6" Deep Inflator Hood | 1 | 1060.00 |
| 16" X 6" Deep Inflator Hood | 1 | 1175.00 |
| 17" X 6" Deep Inflator Hood | 1 | 1250.00 |
| 17.5" X 6" Deep Inflator Hood | 1 | 1300.00 |
| 18" X 6" Deep Inflator Hood | 1 | 1375.00 |
Delivery: 3 to 4 weeks from receipt of Purchase Order. Crating: To be determined Shipping: To be determined Terms: 50% with Purchase Order, Balance Net 30 Days
Rings
Eight (8) rings required for Fully Automatic Inflator with Conveyor
Urethane Indexing Rings are comprised of 1/2" thick urethane pad mounted to a 3/4" thick poly pro base pad. Jointly they have a centered 1/2" dia. countersunk thru hole for mounting.
| Description | 1-3 Ea. | 4-8 Ea. | Actual Ring Diameter |
|---|---|---|---|
| 6" Rim Indexing Ring | 221.00 | 210.00 | 6.437 |
| 8" Rim Indexing Ring | 245.00 | 233.00 | 8.500 |
| 10" Rim Indexing Ring | 273.00 | 260.00 | 10.375 |
| 12" Rim Indexing Ring | 306.00 | 291.00 | 12.875 |
| 13" Rim Indexing Ring | 317.00 | 302.00 | 13.750 |
| 14" Rim Indexing Ring | 343.00 | 327.00 | 14.750 |
| 15" Rim Indexing Ring | 384.00 | 366.00 | 15.750 |
| 16" Rim Indexing Ring | 417.00 | 397.00 | 16.750 |
| 17" Rim Indexing Ring | 453.00 | 430.00 | 17.750 |
| 17.5" Rim Indexing Ring | 483.00 | 460.00 | 18.250 |
| 18" Rim Indexing Ring | 530.00 | 500.00 | 18.750 |
Individual Pads
| Poly Pro Only | |
|---|---|
| 6" | 130.00 |
| 8" | 134.00 |
| 10" | 142.00 |
| 12" | 151.00 |
| 13" | 154.00 |
| 14" | 158.00 |
| 15" | 161.00 |
| 16" | 175.00 |
| 17" | 190.00 |
| 17.5" | 205.00 |
| 18" | 225.00 |
| Urethane Red Only | |
|---|---|
| 6" | 112.00 |
| 8" | 133.00 |
| 10" | 161.00 |
| 12" | 175.00 |
| 13" | 184.00 |
| 14" | 218.00 |
| 15" | 260.00 |
| 16" | 281.00 |
| 17" | 300.00 |
| 17.5" | 321.00 |
| 18" | 345.00 |
